Elatus A: In-furrow: Apply 4–6 mL/100 m row (178 - 267 mL/ac with 36” row spacing)
Elatus B: In-furrow: Apply 500-750mL/ha : 4.5 – 6.8 mL/100m row (202 – 303 mL/ac)
When targeting Silver scurf and Rhizoctonia, one case will treat up to 40 acres.
When targeting Verticilium wilt, use the 30 acre per case rate.
In-furrow application only.
Apply as an in-furrow spray in 50 to 140 L/ha of water at planting.
At a minimum mount a spray nozzle so the spray is directed into the furrow in a 15 to 20 cm band just before the seed is covered.
The optimum spray nozzle configuration requires 2 nozzles per row: one nozzle positioned before the seed piece drops at a 20 degree angle from straight down – angled back towards the seed drop area and a second nozzle positioned to apply after the seed has dropped and before hill closure at an angle of 60 degrees from straight down angled towards the hill closers.
Wales Symbols: Elatus A = L. Elatus B = E.
Add ½ - ¾ of the required amount of water to the spray or mixing tank.
With the agitator running, add Elatus A to the tank.
Allow the Elatus A to completely disperse into the mix water. Continue agitation while adding the remainder of the water and Elatus B to the spray tank.
Spray the mixture with the agitator running.
Apply once in-furrow. If an application of Elatus is made, DO NOT apply more than one application of Aprovia Top fungicide in subsequent foliar applications.